Are your waterjet parts compatible with my machine?

Our parts are OEM-compatible and fit Accustream, OMAX, Flow International, KMT Waterjet and most other major waterjet brands. If you are unsure about compatibility, send us your current part number and we will confirm the correct replacement.

What is the difference between 60K and 94K parts?

60K (60,000 PSI / 4,137 bar) is the standard operating pressure for most waterjet systems. 94K (94,000 PSI / 6,480 bar) is the ultra-high-pressure range used by newer machines for faster cutting speeds and improved edge quality. Parts are NOT interchangeable between pressure ratings — always match the correct pressure class.

How often should I replace waterjet consumables?

Mixing tubes typically last 40–120 hours of cutting depending on abrasive type and pressure. Orifices last 40–100 hours. High-pressure seals in the pump should be replaced every 500–1000 hours. We recommend keeping critical spares in stock to minimise downtime.

FLOW

FLOW

1/4" Swivel Assy, Parallel, C-5152-1

3/8" Swivel Assy, 90 Degree, 010143-1

40K Intensifier High-pressure Seal Kit, 001197-1

40K INTENSIFIER PILOT VALVE HOUSING, 006869-1

60K 1/4 90 Degree Dual Axis Swivel Assembly, B-5725-1

60K CUTTING HEAD ASSY, 046145-5

60K ESL Minor Intensifier Maintenance Kit, 058277-1

60K Intensifier Seal Tool Kit, B-2291-1 + B-1866-1

87K Bleed-down Valve Body, 011742-1

87K Intensifier Filler Tube, 020595-1

90° Swivel Assembly, 1/4 in., 100k, 014922-1

Abrasive diamond head assembly, 301329-1-09, 0,20 mm

Abrasive diamond head assembly, 301329-1-10, 0,25 mm

Abrasive diamond head assembly, 301329-1-11, 0,28 mm

Abrasive diamond head assembly, 301329-1-12, 0,30 mm

Abrasive diamond head assembly, 301329-1-13, 0,33 mm

Abrasive diamond head assembly, 301329-1-14, 0,35 mm

Abrasive inlet cap, A-11080

Abrasive inlet, 009942-1

Actuating plunger, int, B-1007-1

Actuator Assembly Spring, Insta I

Actuator Assembly Spring, Insta II. A-8472

Actuator Assy I, 001323-1

Actuator Assy II, 003840-1

Actuator Assy, low profile, 060013-1

Adapter, bleed down, B-5975-1

Adapter, JIC, Straight,

Alignment scout FLOW, 7.14 x 0,76 x 76,4

Alignment scout FLOW, 7.14 x 1,02 x 76,4

Alignment scout KMT, 9.45 x 0,76 x 76,4

Anti-backsplash valve

Assy, High Pressure Valve, C-2740-1

Back up ring, 014555-1

Back-up ring , 003832-1

Back-up Ring, A-00250-240

Back-up, 001337-1

Bearing bush Swivel

Bending tool 1/4"

Bending tool 1/4", 3/8"

Blade coning tool 1/4", 05108808

Blade coning tool 3/8", 05108824

Blade coning tool 9/16", 05108816

Blast disc, 711933-1

Bleed down repair kit, 004694-1

Bleed down repair kit, 015084-1

Bleed down valve assembly, C-5841-1

Bleed down valve body, 001822-1

Blue GOOP

Blue goop can, 450 gr

Body, bleed down valve, B-8427-1

Booster pump, LP water, 05071659

Brass Back-up 60K, B-1465-1

Bushing, 003838-1

C./G. Antivibr. 1/4 KGL40, 10078699

Cable guide assy, L, C-5462-1

Cable guide assy, R, C-5461-1

Cartridge seal assembly, 040015-1

Ceramic plunger, 010253-1

Check valve assembly 94K, 020071-1

Check Valve Assembly, 010559-3

Check valve body 94K, 020077-1

Check valve body, 004383-3

Check valve inlet, 015384-1

Check valve insert 60K, 004382-1

Check valve outlet body, C-1313-1

Check valve outlet poppet, 005917-1

Check Valve repair kit, 302003-2

Check valve retaining screw, 004380-1

Check valve seat, 014388-1

Check valve spring, A-1606

Collar 1/4" , 10078426

Collar 1/4", FLOW style, 94K, 044348-1

Collar HP block round, 002895-1

Collar, 710869-1

Coning and treading kit 1/4", 3/8"

Coning and treading kit 1/4", 3/8", 9/16"

Coning and treading kit 9/16"

Copper Paste CRC for jackbolts , 100 ML, 80082191