Are your waterjet parts compatible with my machine?

Our parts are OEM-compatible and fit Accustream, OMAX, Flow International, KMT Waterjet and most other major waterjet brands. If you are unsure about compatibility, send us your current part number and we will confirm the correct replacement.

What is the difference between 60K and 94K parts?

60K (60,000 PSI / 4,137 bar) is the standard operating pressure for most waterjet systems. 94K (94,000 PSI / 6,480 bar) is the ultra-high-pressure range used by newer machines for faster cutting speeds and improved edge quality. Parts are NOT interchangeable between pressure ratings — always match the correct pressure class.

How often should I replace waterjet consumables?

Mixing tubes typically last 40–120 hours of cutting depending on abrasive type and pressure. Orifices last 40–100 hours. High-pressure seals in the pump should be replaced every 500–1000 hours. We recommend keeping critical spares in stock to minimise downtime.

WSI

WSI

Actuator End Plate, VL1002J

Adapter JIC/pipe, 05111406

Back up ring, WS1014

Back-Up Ring, VLV1006

ball retainer, WS1023

Bending tool 1/4"

Bending tool 1/4", 3/8"

Blade coning tool 1/4", 05108808

Blade coning tool 3/8", 05108824

Blade coning tool 9/16", 05108816

Blue GOOP

Booster pump, LP water, 20481206

Check valve Assembly, (Flat in / ball out), WS2006

Check Valve Ball, WS1022

Check valve body, WS1038

Check valve outlet body, C-1313-1

Collar 9/16" , 10079119

Coning and treading kit 1/4", 3/8"

Coning and treading kit 1/4", 3/8", 9/16"

Coning and treading kit 9/16"

Copper Paste CRC for jackbolts , 100 ML, 80082191

Diamond Slurry, 1 micron, 400 gr

Diamond Slurry, 3 micron, 400 gr

End Closure Block, Left, WS1001L

End Closure Block, Right, WS1001R

End Plate, Bottom, Pneumatic valve, VL1002K

Filter 1/2" Reg FNPT, 20412815

Filter Element 10 MICR, WA6018

Filter element 80 Micron 10",

Flat inlet retainer, WA1034

FML2 Grease, 10087385

Gland nut 9/16", 10078608

Gland nut, Seal head, WA1020

Guiding bushing, power tool 1/4", 05109814

Guiding bushing, power tool 3/8", 05109822

Guiding bushing, power tool 9/16", 05109830

Hex Nut, Accumulator, 1.20 L, WA1204

High Purity Goop 450 gr, 05026281

High Purity Goop, 49864887

HP Cylinder, WA1006

HP Gauge 100 000 PSI, 490126-1, 20443831

HP Gauge 80000 PSI

HP Seal Assembly, WA1008

HP Seal kit, WS1020

Hydaulic Cylinder seal, WS1012

Hydraulic Oil Filter, WA3011

Hydraulic Oil Filter, WC3006A (E50c)

Inlet Ball Guide, WS1034

Inlet Poppet Check Valve, WA1028

Manometer 6000 PSI / 400 Bar

Manometer 80000 PSI / 5500 Bar

Nozzle holder. 3000004

O-Ring, Actuator Piston N/O, 10074565

O-ring, Manifold, WS1026

O-ring, Oil filter housing, Wa3071A

O-RING, Pneumatic Valve, 10150233

O-ring, WA1023

Outlet poppet seat, WS1024

Plunger disc, WA1032

Pneumatic Valve Mac, 2-3way, 49888035

Poppet guide, WS1040

Port Sealing Head, Accumulator, 1.20 L. WA1201

Power coning tool, 1/4'' , 05109897

Power coning tool, 3/8'' , 05109889

Power coning tool, 9/16'' , 05109871

R-ring kit, Pilot valve, Casting, Rexroth, WA3287

Repair kit bleed down, VL2010

Repair kit Check valve, WS1033

Repair kit, VL1010

Retaining Nut, Accumulator, 1.20 L, WA1203

retaining screw, WA1035

Retaining Screw, WS1045

Seal assembly 0,25", Pneumatic Valve, 10178978

Seal Assembly, Plunger head, WS1027

Seal Ring, Accumulator, 1.20 L, WA1202

Seat, VLV1004

Snap Ring, Hydraulic Bushing, WS1011

Sotted spring pin, check valve, WA1036