RAASM - Fluid Management Solutions
Professional fluid management equipment from RAASM Italy. Pumps, dispensers, hose reels, waste oil drainers and workshop equipment.
RAASM is an Italian manufacturer with over 40 years of experience in professional fluid management equipment. Their range covers the complete workshop fluid cycle — from oil storage and distribution to waste oil collection and disposal.
We supply the full RAASM catalogue including air-operated pumps for oil and grease, hand-operated dispensers, hose reels, service columns, waste oil drainers, brake bleeding equipment and tyre inflation systems. All RAASM products are built for professional workshop environments with heavy-duty construction and long service life.
Browse by Category
Pumps for Boating
3 productsAir-operated Pumps for Grease Distribution
27 productsTransfer and Distribution Oil Pumps
27 productsIndustrial Pumps and Elevators
16 productsHand-operated Oil Dispensers
8 productsService Columns
5 productsHose Reels and Accessories
15 productsBrake Bleeding - Washing - Tyre Inflating
11 productsWaste Oil Drainers
29 productsAll Products
Air-operated grease pump
Air-operated pumps for dispensing all types of grease short and long distance, for greasing at high pressures. A wide range of models facilitates choice for application in kit for installation in centralized systems.
Mobile kit for dispensing grease for drums of 180/220 kg
Mobile grease dispensing kit: the handiest and completest combination for dispensing grease in any workplace(workshop, agriculture, industry, ....), with easy to handle trolley and handy hose-reel with 12 metres of tube.
Wall-mounted grease dispensing kit for drums of 180/220 kg
Wall-mounted grease dispensing kit: complete modular solution for separate use, in fixed position or combined with centralized systems for dispensing grease stored in drums.
Brake and clutch bleeding device without plugs
Chrome-plated device, air-operated, suitable for bleeding the hydraulic brakes and clutches of all motor vehicles. The bleeding operation can be carried out in just a few minutes by one person. The brake-bleeding device is equipped with an elastic inner membrane which hermetically separates the fluid contained in the top chamber from the air contained in an underlying chamber, thus preventing any risk of emulsion. Furthermore, it is equipped with a third high-pressure reserve air chamber (8-10 bar controlled by the bottom air regulator) enabling several bleeding operations to be carried out at a constant pressure and without requiring additional recharges. Also suitable for bleeding systems with braking control and ABS (max. at 1 bar).
Standard series of plugs (A-D-F-I-T-W)
The series of standard plugs comes standard with brake bleeder art.10805 The series of standard plugs can be used to bleed the brakes of most of today’s vehicles. NB: the same plugs can also be supplied individually.
Hand-operated oil dispenser with wheel-mounted 24-litre tank
Oil dispensers with hand-operated double-action pump suitable for high-viscosity (density) oils. These oil dispensers are normally used for filling or topping-up engine, gearbox, differential, etc.
Portable, high-pressure hand-operated grease pump, 13Kg
Pedal and hand-operated portable grease pumps. For practical and safe greasing anywhere, and on any motor vehicle and/or machinery. The seamless pressed tank guarantees the follower plate supplied maximum adherence and functionality.
Hand-operated pump for transferring grease
Hand-operated pump for transferring grease: suitable for easy and clean filling of gearboxes, crankcases, manual grease guns etc. A complete pump cycle transfers 50 grams of grease.
Wheel mounted pressure sprayer 24 litre, with level gauge
Pressure sprayers suitable for the non-toxic spraying of detergent liquids, low density lubrication oils and similar, for washing motors vehicles, grafiting, lubricating, distributing would release oils, etc. Filled to 3/4 their capacity with the chosen liquid and pressurized with air at 6-8 bar, they work autonomously without requiring continuous connection to the compressed-air line.
Waste oil drainer 90L
Oil drainer with wheel-mounted tank: practical and functional, suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on auto lift or pit. The centrally mounted 13-litre capacity bowl, in addition to being height-adjustable, can be optimally positioned thanks to the swivel joint on which it is applied.
Wheel-mounted air-operated oil drainer 24-litre tank
The air-operated drainers are ideal for quick engine oil change (by means of suction with the probe) of any motor vehicle: auto, truck, tractors, small aircraft, boats, etc. Once depressurized, they work autonomously anywhere because they do not require continuous connection to the compressed-air system. The oil must be hot (70/80°C).
Air-operated oil drainer, 65-litre
The air-operated drainers are ideal for quick engine oil change (by means of suction) of any motor vehicle. The transparent chamber allows the quantity and quality of sucked oil to be checked immediately. Once depressurized, they work autonomously anywhere because they do not require continuous connection to the compressed-air system. The oil must be hot (70/80°C).
Combination waste oil suction/drainer
The combination oil suction/ drainers are suitable for draining the engine oil from any motor vehicle by gravity, (with vehicles placed on auto lift or pit) and with probe. The transparent chamber allows the quantity and quality of the sucked oil to be controlled immediately. The oil must be hot (70/80 °C).
Universal pantograph oil drainer
Due to their versatility, these pantograph oil suction/drainers are universal drainers because they can be used to change the oil of all motor vehicles and motorcycles: - by gravity with tank on floor - by gravity with tank raised, with motor vehicles placed on auto lift or pit. - by suction with probe inserted directly in the engine, and anywhere because they do not require continuous connection to the compressed-air line or to other energy sources. (The oil must be hot 70/80° C).
Universal pantograph oil suction/drainer, 115-litre
Universal pantograph oil suction/drainer for cars with bowl, with wheel-mounted 115-litre tank equipped with level-gauge, supplied with series of probes art. 45560. Due to their versatility, these pantograph oil suction/drainers are universal drainers because they can be used to change the oil of all motor vehicles: - by gravity with tank on floor - by gravity with tank raised, with motor vehicles placed on auto lift or pit. - by suction with probe inserted directly in the engine, and anywhere because they do not require continuous connection to the compressed-air line or to other energy sources. (The oil must be hot 70/80° C).
Universal pantograph waste oil suction/drainer for trucks, 115-litre
Universal pantograph waste oil suction/drainer for trucks, with wheel-mounted 115-litre tank equipped with level-gauge and removable tool tray, supplied with series of probes art. 45560. Due to their versatility, these pantograph oil suction/drainers are universal drainers because they can be used to change the oil of all motor vehicles: - by gravity with tank on floor - by gravity with tank raised, with motor vehicles placed on auto lift or pit. - by suction with probe inserted directly in the engine, and anywhere because they do not require continuous connection to the compressed-air line or to other energy sources. (The oil must be hot 70/80° C).
Oil gun
Accessories for dispenser pumps. Oil gun complete with: swivel joint F 1/2” G. two outlet tubes, one flexible with bent metal terminal and one rigid, equipped with two interchangeable pressurized semiautomatic drip-catchers, one of Ø 10 and the other of Ø 16.
Mobile oil dispenser platform
Mobile oil dispenser platform: the most practical and complete combination for dispensing oil of any density and in any workplace (workshop, farming, industry, etc.) determined both by the easy to handle trolley and the practical hose reel with its 10 metres of hose.
Modular dispenser kit for 180/220 kg
Wall-mounted modular oil dispenser kit: suitable for connection to centralized systems, to the hose reel or directly to the delivery tube for dispensing oil stored in drums and/or in tanks.
Oil dispenser with wheel-mounted 65-litre tank
The oil dispenser with wheel-mounted 65-litre tank equipped with level gauge, is a practical and modern combination for dispensing oils of any density, in any workplace (workshops, farming, industry, etc.). Complete with digital meter.
Pump 18 l/min ratio 5:1 for trade drums 180/220 kg
Air-operated double-acting universal oil pumps 18 l/min, also for dispensing high-density oil, suitable for all applications, and particularly for centralized installations.
Pump 18 l/min ratio 5:1 for wall-mounted (or fixed) application.
Air-operated double-acting universal oil pumps 18 l/min, also for dispensing high-density oil, suitable for all applications, and particularly for centralized installations.
Pneumatic industrial pump, serie 1200
Adapted for the transfer of oils, lubricating and related, they guarantee high presentations so much regarding the flow (l/min) as to the pressure of employment. Compatible fluids: grease, oils of high viscosity.
Hose-reel Serie 288, 15m. Air/Water, 20 bar
Supplied pipe: 15m - 8x12 (971.115) In conformity with the norm Atex 94/9 the IInd 3 GD c X The bridle of hooking of the winder possesses four orifices that allow an easy and sure installation. Using the supplied greyhound bitch, it is possible to predispose the orifices of the plugs, later, to proceed with supreme facility to the fixation of the winder.
Frequently Asked Questions
What industries use RAASM equipment?
RAASM equipment is used in automotive workshops, fleet maintenance centres, agricultural service stations, mining operations, marine maintenance, food processing plants and any facility that handles oils, greases or other fluids. Their products are designed for professional, high-volume use.
Do you stock RAASM spare parts?
Yes. We carry common RAASM spare parts including pump repair kits, hose assemblies, nozzles and fittings. For less common parts, we can supply directly from RAASM Italy with typical lead times of 5–10 working days.
What is the warranty on RAASM products?
RAASM products carry a 2-year manufacturer warranty covering defects in materials and workmanship. Extended warranty and service agreements are available for fleet and multi-unit installations.