MIXTRON Dosing & Pressure Pumps
Proportional water-powered dosing pumps and high-pressure solutions for industrial, agricultural and water applications.
MIXTRON is not limited to irrigation. Its proportional volumetric dosing pumps use water flow and pressure to draw concentrate into the line without an external electrical supply. Applications include metalworking and process fluids, livestock, irrigation and fertigation, vehicle washing, water treatment, and cleaning or disinfection. MIXTRON also manufactures a separate family of high-pressure pumps.
Across the proportional dosing range, model capacities extend from 750 to 13,000 litres per hour and model-specific dosing ratios span 0.03% to 10%. These figures describe the overall range: each model has its own flow, pressure, dosing and material limits. Confirm the liquid, concentration, temperature, minimum and maximum flow, line pressure and installation arrangement before choosing a configuration.
Application special · Irrigation & fertigation
Official MIXTRON importer for IrelandSee MIXTRON dosing at work in a real nursery
Irrigation is one of several MIXTRON application sectors. This 50-second field demo shows a water-powered unit installed on a nursery line. Open the dedicated guide to select by flow, target dose, pressure and chemical compatibility.
- No electrical supply at the dosing point
- Proportional dosing as irrigation flow changes
- Models from 750 to 13,000 l/h
Real field installation · 50 seconds
MIXTRON Dosing pump 1500l/h - 0,2 – 2 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 0.2 - 2 % Max water flow: 1500 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosing pump 1500l/h - 0.03 - 0.3 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 0.5 - 4 % Max water flow: 1500 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosing pump 1500l/h - 0.5 - 4 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 0.5 - 4 % Max water flow: 1500 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosing pump 1500l/h - 1 - 10 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 1 - 10 % Max water flow: 1500 l/h Special for metalworking fluids Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosing pump 1500l/h - 1 - 5 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 1 - 5 % Max water flow: 1500 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
Dosing pump MIXTRON.1100.P055 EPDM BYPASS
MIXTRON MX.1100.P055 EPDM BYPASS is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 11000 l / h. Dosage: 0.5 – 5% Easily adjustable flow rate, no engine, powered only by water. Dosing ratio: 0.5 - 5 % Max water flow: 11000 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex SealsViton, EPDM Operating pressure: 0,3 - 8 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 20 kg Dimensions: 120 × 40 × 40 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter 1 Sector key kit for bell 9.5-13 m3/h
Dosing pump MIXTRON.1100.P055 VITON BYPASS
MIXTRON MX.1100.P055 EPDM BYPASS is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 11000 l / h. Dosage: 0.5 – 5% Easily adjustable flow rate, no engine, powered only by water. Dosing ratio: 0.5 - 5 % Max water flow: 11000 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex SealsViton, VITON Operating pressure: 0,3 - 8 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 20 kg Dimensions: 120 × 40 × 40 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter 1 Sector key kit for bell 9.5-13 m3/h
Dosing pump MIXTRON.1300.P055 EPDM BYPASS
MIXTRON MX.1300.P055 EPDM BYPASS is a proportional volumetric doser suitable for mixing liquids in various fields of application. Its Bypass system allows the engine not to be affected by any chemical agent. It has a variable flow rate from 10 l / h to 13000 l / h. Dosage: 0.5 – 5% Easily adjustable dosage ratio, no motor, powered only by water. Dosing ratio 0.5 - 5 % Max water flow 13000 l/h Plastic components POM, PP, HDPE, PA12 Metal components AISI 316, Duplex SealsViton, EPDM Operating pressure 0,3 - 8 bar Max static pressure 10 bar Temperature 5° - 40° C Weight 20 kg Dimensions 120 × 40 × 40 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter 1 Sector key kit for bell 9.5-13 m3 / h
Dosing pump MIXTRON.1300.P055 VITON BYPASS
MIXTRON MX.1300.P055 VITON BYPASS is a proportional volumetric doser suitable for mixing liquids in various fields of application. Its Bypass system allows the engine not to be affected by any chemical agent. It has a variable flow rate from 10 l / h to 13000 l / h. Dosage: 0.5 – 5% Easily adjustable dosage ratio, no motor, powered only by water. Dosing ratio 0.5 - 5 % Max water flow 13000 l/h Plastic components POM, PP, HDPE, PA12 Metal components AISI 316, Duplex SealsViton, EPDM Operating pressure 0,3 - 8 bar Max static pressure 10 bar Temperature 5° - 40° C Weight 20 kg Dimensions 120 × 40 × 40 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter 1 Sector key kit for bell 9.5-13 m3 / h
MIXTRON Dosing pump 1-5% 3000l/h BYPASS
\n The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. \n ◆ Quick and easy to install \n ◆ No engine, water powered \n ◆ Low maintenance \n Package contents: \n ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) \n ◆ 1 Fixing plate \n ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) \n ◆ 1 Stainless steel filter for suction pipe \n ◆ 1 Owner’s manual
MIXTRON Dosificador 0,03 - 0,3 % - 3000l/h VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Dosing pump 0.2-2% 3000l/h BYPASS
\n The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. \n ◆ Quick and easy to install \n ◆ No engine, water powered \n ◆ Low maintenance \n Package contents: \n ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) \n ◆ 1 Fixing plate \n ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) \n ◆ 1 Stainless steel filter for suction pipe \n ◆ 1 Owner’s manual
MIXTRON Dosificador 0,2 - 2 % - 3000l/h VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Dosing pump 3000l/h - 0.5 - 4 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 0.5 - 4 % Max water flow: 1500 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosing pump 3000l/h - 1 - 5 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 0.5 - 4 % Max water flow: 1500 l/h Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosing pump 3000l/h - 1 - 10 % VITON
MIXTRON MX.150.P003 EPDM is a proportional volumetric dosing pump suitable for mixing liquids for a broad range of applications. It has a variable flow rate from 10 l / h to 1500 l / h. Dosing ratio 0.5 - 4 % Max water flow: 1500 l/h Special for metalworking fluids Plastic components: POM, PP, HDPE, PA12 Metal components: AISI 316, Duplex Seals: Viton Operating pressure: 0,3 - 6 bar Max static pressure: 10 bar Temperature: 5° - 40° C Weight: 2.8 kg Dimensions: 58 × 20 × 15 cm Package Contents: 1 Mixtron Dosing Pump with user manual 1 fixing bracket 1 1.5 meter suction pipe 1 filter
MIXTRON Dosificador 2500l/h 0,03 - 0.3 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Doser 2500l/h 0,2 - 2 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Doser 2500l/h 0,5 - 4 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Doser 2500l/h 2500l/h 1 - 5 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Doser 2500l/h 2500l/h 1 - 10 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance * Special for metalworking fluids Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Dosificador 750l/h 0,03 - 0.3 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Dosificador 750l/h 0,2 - 2 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
MIXTRON Dosificador 750l/h 0,5 - 4 % - VITON
The maximum quality in all mechanical machining, such as too duration and correct wear, starts with calibrated lubrication and cooling in all phases. The use of our doser connected to the water mains, to supply the water necessary to prepare the lubri-coolant solution and tank (or the lubricant oil supply line) is the only method able to guarantee perfect and constant a correctly dispensed mix in the required percentage to obtain maximum quality. Only other method used to prepare the lubri-coolant liquid is not able to guarantee the same performance levels. ◆ Quick and easy to install ◆ No engine, water powered ◆ Low maintenance Package contents: ◆ Mixtron Doser (W 455 x L 165 x Ø 125 mm) (W 17.9 x L 6.5 x Ø 4.9 inches) ◆ 1 Fixing plate ◆ 1 Stainless steel suction strengthened tube length 1.5 m (4.9 ft) ◆ 1 Stainless steel filter for suction pipe ◆ 1 Owner’s manual
Frequently Asked Questions
Is MIXTRON only for irrigation and fertigation?
No. Fertigation is one application sector. The range also serves metalworking and process fluids, livestock, vehicle washing, water treatment, cleaning and disinfection, alongside a separate high-pressure pump family.
How does a proportional MIXTRON dosing pump work?
Water passing through the unit drives its dosing mechanism, which draws concentrate and injects it in proportion to the water volume within the selected model's operating envelope. No external electrical supply is required at the dosing point.
What information is needed to select a model?
Provide the liquid and target concentration, minimum and maximum water flow, operating pressure, temperature and installation layout. We will then check the suitable dosing range, materials and accessories.
What is the difference between a dosing pump and a high-pressure pump?
A proportional dosing pump injects concentrate into a flowing water line. A high-pressure pump is a separate product family designed to generate pressurised water flow. Selection starts with the required function and operating data.