Skip to content

Gleam Equipment Ireland

Industrial Laser Welding Machines Ireland

Handheld and pulsed QCW fibre laser welding systems (750W to 3000W) specified for Irish metal fabrication workshops, with wire feed, commissioning and operator training.

Air-cooled 1500W, water-cooled 2000W/3000W & pulsed QCW-750

Single or double wire feeder matched to material & thickness

Delivery, commissioning & operator training across Ireland

Quote-only machinery

Specify the right configuration before buying

Fibre laser welding delivers cleaner seams, faster travel speeds and substantially less distortion than conventional TIG or MIG on stainless steel, carbon steel, galvanized sheet, aluminium and copper. Choosing the right system, however, depends on real material thickness, joint gap tolerance, wire feed requirements and daily duty cycle.

Gleam Equipment supplies LUCOHE air-cooled handheld welders (1000W–2000W), heavy-duty water-cooled industrial units (1500W–3000W with single or double wire feeder) and pulsed QCW-750 precision welders across Ireland. Every quotation is reviewed against your joint geometry and includes delivery, on-site commissioning and operator training.

Request Quote

Get in touch for quotes, technical support or any enquiry

* Required fields

Recommended models

Machines to compare

LUCOHE HLW-1500 — 1500W Air-Cooled Handheld Welder

LUCOHE HLW-1500 — 1500W Air-Cooled Handheld Welder

Compact active air-cooled 1500W fibre laser welder for thin-to-medium stainless steel, mild steel and aluminium enclosures without chiller maintenance.

LUCOHE HLW-2000 — 2000W Water-Cooled Handheld Welder

LUCOHE HLW-2000 — 2000W Water-Cooled Handheld Welder

All-day production 2000W water-cooled system with built-in chiller, 10 m fibre cable, automatic wire feeder and optional double-wire setup.

LUCOHE HLW-3000 — 3000W Industrial Laser Welder

LUCOHE HLW-3000 — 3000W Industrial Laser Welder

High-penetration 3000W water-cooled welder with SUP-23T 4-in-1 head and optional double wire feeder for heavier stainless and structural sections up to 5–6 mm.

LUCOHE QCW-750 — Pulsed Precision Laser Welder

LUCOHE QCW-750 — Pulsed Precision Laser Welder

750W average / 2000W peak quasi-continuous wave (QCW) pulsed laser welder for fine sheet, delicate components and ultra-low heat input.

Selection criteria

What we check before quoting

Material, thickness & joint fit-up

We check your alloy family (304/316 stainless, mild steel, aluminium, copper), thickness range and joint gap (<= 0.5 mm single wire or wider bridge with double wire feed) before sizing wattage.

Air-cooled vs water-cooled duty cycle

Intermittent bench work benefits from compact air-cooled systems (HLW-1500), whereas multi-hour shift welding or 5–6 mm stainless requires built-in water cooling (HLW-2000 / HLW-3000).

Laser safety, PPE & Irish commissioning

Class 4 handheld laser welding requires proper screening, OD-rated laser eyewear, shielding gas setup and trained operators. Our quotes cover commissioning and practical workshop training in Ireland.

Typical applications

Stainless steel catering, pharma & dairy fabrication

Sheet metal cabinets, enclosures & architectural metalwork

5–6 mm stainless & carbon steel assemblies with wire feed

Aluminium & dissimilar metal fabrication

Low-distortion precision QCW spot & seam welding

Weld seam cleaning & post-weld passivating prep

Commercial process

From first enquiry to confirmed quote

Step 1

Joint & material review

Send material grade, thickness (mm), typical joint photos or drawings, and power supply available (single-phase 220V or three-phase).

Step 2

Technical configuration

We recommend the right LUCOHE model (1500W, 2000W, 3000W or QCW-750), single vs double wire feeder, nozzle kit and safety accessories.

Step 3

Delivered & commissioned quote

Receive a clear written quotation delivered to your Irish workshop, including commissioning, operator training, warranty and spare consumables.

Questions before purchase

Should we choose 1500W, 2000W or 3000W for stainless steel?

For 0.8–3 mm stainless sheet and intermittent fabrication, 1500W air-cooled or 2000W water-cooled is typically ideal. For 4–6 mm stainless or continuous heavy workshop duty, we recommend the 3000W HLW-3000 with filler wire (and optional double wire feeder for wider gaps).

What power supply and gas do handheld laser welders require?

Depending on the selected model, single-phase 220–230V or three-phase industrial supply is supported, paired with nitrogen or argon shielding gas to achieve bright, oxide-free seams.

Do you include delivery, commissioning and training in Ireland?

Yes. Gleam Equipment Limited (Cork) quotes delivered solutions across the Republic of Ireland and Northern Ireland, including on-site commissioning, operator training and ongoing consumables support.

Call WhatsApp Quote